終端器 Termination/Dummy Load

 RF電路元件或裝置,主要是保護系統消耗主動元件發射能量。 

Termination/Dummy Load

RF circuit components or devices are mainly used to protect the system from consuming active component emission energy. 

信號終端是指在傳輸線的開始處及末端加上終端器,以避免射頻訊號到達末端後反射,造成干擾或是功率損失。終端器一般會放在傳輸線的末端,其阻抗會匹配線材的特性阻抗,讓信號反射和功率損失降到最小。

射頻電流會在線纜的不連續處(例如連接器及接頭處)反射,並且反射到信號的發射端,造成第一反射訊號。多次反射訊號一般會出現在線纜的頭部,會反射舊的訊號,使干擾持續存在。這些反射會讓訊號無法完整的傳送到目的方。

Signal termination refers to adding terminators at the beginning and end of the transmission line to prevent the RF signal from being reflected after reaching the end, causing interference or power loss. The terminator is generally placed at the end of the transmission line, and its impedance will match the characteristic impedance of the wire to minimize signal reflection and power loss.

The RF current will be reflected at the discontinuities of the cable (such as connectors and joints), and reflected to the transmitting end of the signal, resulting in the first reflected signal. Multiple reflections usually occur at the head of the cable, reflecting old signals and causing interference to persist. These reflections will prevent the signal from being completely transmitted to the destination.

假負載(Dummy Load)

1-4w.gif

JTD-LPTE-50W-4GNxS_R

50W LOW PIM TERMINATION LOAD(600-4000MHz)

1-4w.gif

JTD-TE-50W-4GNMx

50W N TYPE TERMINATION LOAD (DC-4G)

1-4w.gif

JTDW-LPTxx-3-xxM

低 PIM 射頻終端負載(LOW PIM RF TERMINATION LOAD)

1-4w.gif

JTDW-Txxx-3-NM

標準射頻終端負載(STANDARD RF TERMINATION LOAD)

7d.gif

TS-50-327-4M-160

Termination Load (50W, 380-2690MHz, 4.3-10 Male, -160dBc)

1-4w.gif

TS-T-D060A-100-153

Termination Load DC-6000 MHz

1-4w.gif

JTD-DL-20W-6GN/X

20W N TYPE TERMINATION LOAD (DC-6G)

14d.gif

TSLD-338-100W-XM-150

100W Low PIM Load (698-3800MHz, -150dBc, IP65)

7d.gif

TSLD-638-50W-XM-150

50W Low PIM Load (698-3800MHz, -150dBc, IP65)

7d.gif

TSLD-638-25W-XM-150

25W Low PIM Load (698-3800MHz, -150dBc, IP65)

14d.gif

TSLD-638-10W-XM-150

10W Low PIM Load (698-3800MHz, -150dBc, IP65)

3-5d.gif

TE-5W-3GN

5W, N Type Termination Load (DC-3GHz)

7d.gif

終端器(Termination Load )

終端器(Termination Load,DC~6GHz )

交通資訊(Traffic Info)

本公司距台北火車站摩托車車程只需20分鐘,地理位置適中,鄰近百齡橋、陽明高中、百齡高中、士林夜市、圓山大飯店、天文台、美術館、兒童育樂中心等。(The company is only 20 minutes away from Taipei Railway Station by motorcycle. The geographical position is moderate, close to Balling Bridge, Yangming High School, Balling High School, Shilin Night Market, Grand Hotel, Observatory, Art Museum, Children's Education Center, etc.)

交通(traffic)

捷運淡水線:由劍潭站2號出口步行至本公司約10-15分鐘 (MRT Danshui Line: Walk from Exit 2 of Jiantan Station to our company about 10-15 minutes)

250路:公車由永和至後港,每小時一班 (No. 250: Bus runs every hour from Yonghe to Hougang)

529路:百齡→劍潭捷運站→士林區行政中心→百齡 (Route 529: BailingJiantan MRT StationShilin District Administrative CenterBailing)

重慶幹線:百齡→重慶北路→火車站→重慶北路→百齡 (Chongqing Main Line: Bailing Chongqing North Road Railway Station Chongqing North Road  Bailing)

如自行開車至我公司,附近均有收費停車場 (If you drive to our company by yourself, there are paid parking lots nearby)

辦公室地址(Address)

通馳科技股份有限公司 (Tone Spread Technology Co.,Ltd)
統編(TAX ID):27337203

杰通數碼科技有限公司 (Jietong Digital Technology Ltd.) 
統編(TAX ID):90474210

11169 台灣 台北市士林區福港街 141 號 2 樓

2F ,No 141,Fu-Gang St., Shilin Dist., Taipei City 11169, Taiwan

 

營業時間(Service Hrs)

星期一(Mon) ~ 星期五(Fri) : 9:30am 到 6:00pm

星期六日(Sat~Sun) : 公休(Closed)

例假日(Holiday) : 公休(Closed)

聯絡資訊(Contacts)

電話(Tel): (02)2882-8979 分機(ext.): 31

傳真(Fax): (02)2882-9196

手機(Mobile): 0935-875-076

手機(Mobile): 0955-073-637

電郵(E-mail): sales@tspd.com.tw;tone.spread@msa.hinet.net

電郵(E-mail): sales@jtd.com.tw

Line ID: mikechang5000

Skype: mikechang666

WhatsApp: +886 935875076

WeChat: mikechang5000

露天拍賣