RF 中繼器提供了一種經濟實惠的解決方案,以解決由於建築障礙物導致的信號衰落和衰減導致的室內信號覆蓋問題。其易於安裝和維護,可以幫助承運人快速獲得回報。
中繼器作為 BTS 和移動設備之間的中繼器工作。它通過施主天線從 BTS 接收最強信號,對信號進行線性放大,然後通過室內信號分配系統將其重新傳輸到弱/盲覆蓋區域。並且移動信號也被放大並通過相反的方向重傳到BTS。
主要特徵
² 兩個信號端口,全雙工設計。
² 鋁合金外殼,IP65防護等級,防塵、防水、防腐蝕。
² 線性功率放大,有效抑制互調和雜散發射。
² 採用高選擇性、低插入損耗的濾波器,消除了上下行之間的干擾。
² 穩定和改善的信號傳輸質量。
² 內置5G動態TDD同步檢測模塊,自動完成5G無線網絡小區搜索和無線信令處理。
² 智能自動電平控制(ALC)確保輸出電平穩定且連續可調。
² USB端口提供連接到本地監控的筆記本電腦或基於IP的NMS(網絡管理系統),可以遠程監控中繼器的工作狀態並通過以太網將操作參數下載到中繼器。
The RF Repeater provides an affordable solution to solve the indoor signal coverage problems due to signal fading and attenuation caused by architecture obstacles. And its easy installation and maintenance can help carrier get fast return.
The repeater is working as a relay between the BTS and mobiles. It picks up the strongest signal from BTS via the Donor Antenna, linearly amplifies the signal and then retransmits it via the Indoor Signal Distribution System to the weak/blind coverage area. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction.
Key features
² Two signal ports with full duplex design.
² Aluminum-alloy casing with IP65 protection has high resistance to dust, water and corrosion.
² Linear power amplification to effectively suppress inter-modulation and spurious emission.
² Adopting filter with highly selectivity and low insertion loss eliminates interference between uplink and downlink.
² Stable and improved signal transmission quality.
² Built-in 5G Dynamic TDD Sync Detection Module, automatic completion of 5G wireless network cell search and wireless signaling processing.
² Smart Automatic Level Control (ALC) ensures output level stable and adjustable continuously.
² USB port provides a link to a notebook for local supervision or IP Based NMS (Network Management System) that can remotely supervise repeater’s working status and download operational parameters to the repeater Via Ethernet.