JTD-BDA- AT54A27B

路由器放大器是一種用於船舶的工業級蜂窩放大器，可與 EMEA 和美洲的所有移動運營商合作。它確保蜂窩路由器連接到距離海岸線 30 公里遠的移動信號。它有多達 4 個端口，可以連接到 2X2 DL MIMO 配置中的 2 個無線電卡。它與最新的 5G 路由器兼容。

對於具有 2 個無線電的路由器，路由器放大器將連接到室外天線的電纜數量減少了 2 倍。

當連接到 Cloud NMS 時，可以對其進行遠程管理、監控和調整，並接收每個頻段的信號功率和增益的實時測量值。

在旁路模式下，在市區時可以旁路放大器。這允許路由器接收更多頻段，包括 3.6GHz 的 5G。

The Router Amplifier is an industrial grade cellular amplifier for ships that works with all mobile operators in the EMEA and Americas. It ensures that the cellular router is connected to mobile signal as far out as 30km from the coastline. It has up to 4 ports that can connect to 2 radio cards in 2X2 DL MIMO configuration. It is compatible with the latest 5G routers.

For routers with 2 radios, the Router Amp reduces the number of cables to the outdoor antennas by a factor of 2.

When connected to Cloud NMS, it can be remotely managed, monitored and adjusted, as well as receive real[1]time measurements of signal power and gain for each band.

In By-pass mode, the amplifier can be bypassed when in urban areas. This allows the router to receive more bands including 5G at 3.6GHz.

Marine Router Amplifier 是在小船、輪船或船舶上增強和分配 5G/4G/3G/2G 移動信號的理想產品。支持多種移動設備的語音和移動互聯網，提升海上移動覆蓋範圍從未如此簡單。典型的設置包括船上高處的船用天線以接收移動信號，該天線連接到船用路由器放大器。甲板上的天線連接到 Marine Router Amplifier，以將增強信號分發到蜂窩路由器。我們為所有移動運營商提供系統。

The Marine Router Amplifier is the ideal product to boost and distribute a 5G/4G/3G/2G mobile signal on a boat, ship or marine vessel. Supporting voice and mobile internet for multiple mobile devices, boosting your mobile coverage at sea has never been easier. Typical setup includes a marine antenna up high in the vessel to receive the mobile signal, which connects into the Marine Router Amplifier. An antenna down on deck connects to the Marine Router Amplifier to disburse the boosted signal to the Cellular Router. We offer systems for all mobile operators.